Bonfire and Venturi Bridled Logs Flame Comparisons

bonfire-web-logo
bonfire-log-web

Bonfire Bridled Large Log
8″ – 12″ Diameters

• Bridled with wire for a more efficient burn time of approximately 1.5 hours

• Do not remove the bridling wire

• .3 cubic feet / 518.4 cubic inches

• Do not get wet prior to lighting

• Use in a fireplace indoors

• Use on a platform outdoors

• DO NOT burn on concrete or asphalt

• Patent Pending

• No Living Trees Were Harvested to Make This Product

One Match Starter Cube

Creates a traditional fire burn

venturi-web-logo
venturi-web-log

Venturi Torch Bridled Regular Log
6″ – 8″ Diameter

• Bridled with wire for a more efficient burn time of approximately 1.5 hours

• Do not remove the bridling wire

• .2 cubic feet / 345.6 cubic inches

• Do not get wet prior to lighting

• Use in a fireplace indoors

• Use on a platform outdoors

• DO NOT burn on concrete or asphalt

• Patent Pending

• No Living Trees Were Harvested to Make This Product

One Match Starter Cube

 

Creates venturi flame as flame shoots from the top

Bonfire Bridled Log and Competition Burn Comparisons.

This is a 30 second video of a 15 minute time lapse

Setup Instructions

Place log centered on level, dry, nonporous base surface in a fireplace, wood stove, fire pit or other suitable nonflammable receptacle. Make sure the area is well ventilated and clear of combustible materials. Have water and/or a working fire extinguisher available for immediate use before lighting Fast Fire fire starter. Follow Lighting Instructions explained below or review QR Codes below for videos on your phone.

Lighting Instructions

1. DO NOT handle fire starter cube when lighting.
2. Tip log upside down and tap bottom until fire starter falls out of log (Photo 1).
3. DO NOT unwrap fire starter from water resistant cellophane wrapper. Grab a stick, or ANYTHING available and press object against fire starter such that it is sticking halfway out of log like (Photo 2).
4. Light Fast Fire and continue to press against fire starter (Photo 3) until the exposed portion of fire starter is fully engulfed in flame (Photo 4) then release pressure and allow fire starter to drop to bottom of log.

Cautions

This large open flame log can cause fire and burn injuries.
DO NOT USE if you are not confident in your skills to handle fire.
Use indoors ONLY in a fireplace or wood stove. Use outdoors ONLY in a fire pit, fire ring, chimney, or a flat, level, non-flammable surface. DO NOT burn on blacktop or cement patios, driveways or porches as damage may occur. DO NOT use around combustible chemicals, fluids or materials. DO NOT leave children unattended near burning log.
DO NOT touch or knock over burning log.

Warnings

California Proposition 65 Warning: All wood including this wood produces chemicals known by the State of California to cause cancer, birth defects, or other reproductive harm when burning. Use of this and other solid fuels may be restricted at times by law. Please check 1-877-4NO-BURN (1-800-466-2876 or http://www.8774noburn.org) before burning.

*Treatment

Kiln dried heat treatment to a core temperature of 160°F, 71.1°C for 75 minutes for mold, mildew and insect free quick starts. DO NOT get wet prior to use.

Determining the Truck Carrier that Best Serves Your Shipping and Delivery Requirements

We are happy to assist you in setting up an account with a carrier and clearly identifying your cost per goods per unit once a contract has been established. We want to discuss with you a drop trailer program to save labor costs.

The Wood Guys will manage all scheduling for pick up of product and submit the carrier information to your Receiving Department so that your organization can set up a delivery date and time. We are willing to set the delivery appointments if the Receiving Department will confirm delivery date and time prior to pickup at our warehouse.

Bonfire Large Log 8-12” Diameter
(Creates a traditional fire burn. See video above)

Venturi Torch Regular Log 6-8” Diameter
(Creates a Venturi flame as the fire ejects from top of hole. See video above)

For the purpose of sorting log sizes and maximizing pallet space we are putting two rows of large logs and two rows of standard logs on a pallet.

We are assuming most retailers use a Standard, #1 Heat Treated
40” X 48” inch 4 way hardwood pallet like the one in this photo.

You may already have a dependable trucking relationship and we will work with whoever you prefer. We provide information on a few truck carrier companies and their equipment that differentiates on the way our product can be shipped and delivered to your distribution center, warehouse, store, or final point of sale.

Send Mail to:
The Wood Guys
Post Office Box 598
Bellevue, WA 98005-0598

©2023 The Wood Guys